To Next PageTo Next Page
Need help?Do you have a question about the Corsair iCUE H100i RGB PRO XT and is the answer not in the manual?
General| Material | Aluminium, Copper |
|---|---|
| Product color | Black |
| Number of fans | 2 fan(s) |
| Illumination LED | Yes |
| Radiator material | Aluminum |
| Water block material | Copper |
| Type | All-in-one liquid cooler |
| Fan diameter | 120 mm |
| Fan speed (max) | 2400 RPM |
| Quantity per pack | 1 pc(s) |
| Suitable location | Processor |
| Supported processor sockets | LGA 1150 (Socket H3), LGA 1151 (Socket H4), LGA 1155 (Socket H2), LGA 1156 (Socket H), LGA 2011 (Socket R), LGA 2011-v3 (Socket R), LGA 2066, Socket AM2, Socket AM2+, Socket AM3, Socket AM3+, Socket AM4 |
| Harmonized System (HS) code | 84733080 |
| Country of origin | China |
Weight and Dimensions| Fan weight | 830 g |
|---|---|
| Fan thickness | 25 mm |
| Radiator width | 277 mm |
| Radiator height | 27 mm |
Lists hardware components specifically for Intel CPU installations.
Steps for installing the Intel backplate onto the motherboard.
Instructions for installing Intel standoff screws for motherboard mounting.
Steps for installing the radiator and fans for optimal cooling performance.
Instructions for aligning and securing the pump unit onto the motherboard assembly.
Steps for connecting pump and fan power cables to SATA and CPU_FAN headers.
Instructions for connecting the pump unit to a motherboard USB 2.0 header.
Steps to remove the Intel bracket and install the AMD (AM3/AM4) mounting bracket.
Steps for installing the radiator and fans for optimal cooling performance on AMD systems.
Instructions for preparing the mounting bracket by inserting AMD screw clips.
Steps for aligning and securing the pump unit with AMD mounting clips.
Steps for connecting pump and fan power cables to SATA and CPU_FAN headers for AMD systems.
Instructions for connecting the pump unit to a motherboard USB 2.0 header for AMD systems.
Steps to remove the Intel bracket and install the AMD sTR4 mounting bracket.
Instructions for installing AMD sTR4 standoff screws into the CPU socket.
Steps for installing the radiator and fans for optimal cooling performance on AMD sTR4 systems.
Steps for aligning and securing the pump unit with AMD sTR4 mounting clips.
Steps for connecting pump and fan power cables to SATA and CPU_FAN headers for AMD sTR4 systems.
Instructions for connecting the pump unit to a motherboard USB 2.0 header for AMD sTR4 systems.
Explains how to identify the fan's air flow direction using an indicator arrow.
Advises cleaning old thermal paste and applying new paste for re-installation.
