Need help?Do you have a question about the Corsair AR120 RGB Series and is the answer not in the manual?
General| Brand | Corsair |
|---|---|
| Model | AR120 RGB Series |
| Category | Computer Hardware |
| Language | English |
Mount the fan inside your case with the provided mounting screws. Fan mount locations will vary.
Connect the RGB LED cable from the ARGB fan to the ARGB adapter cable for 5V ARGB connection.
Find a location for the controller allowing fan cable reach, then mount with included strips.
Mount the fan inside your case using the provided mounting screws. Locations may vary by case.
Connect the 4-pin RGB connector from the ARGB fan to the iCUE lighting controller in sequential order.
Plug the 9-pin USB cable into a motherboard/USB hub header and connect SATA power.
Click the image to download the latest CORSAIR iCUE software.
Select the '8-LED Fan Series' on the Lighting Setup page under the iCUE lighting controller.
Visit CORSAIR LAB YouTube channel for more tips and instructions on CORSAIR fans.
To Next Page