8
PROFESSIONAL SERIES GOLD
CMPSU-850AX
QTY LENGTH CONNECTOR/CABLE
1 600mm 1
ATX CABLE (24-PIN)
2 600mm 1
EPS12V CPU CABLE (8-PIN)
2 600mm 2
PCI-E CABLE
2 850mm 4
SATA CABLE
2 600mm 2
2 850mm 4
PERIPHERIAL CABLE
2 101mm 1
FLOPPY ADAPTER
CMPSU-1200AX
QTY LENGTH CONNECTOR/CABLE
1 610mm 1
ATX CABLE (24-PIN)
2 610mm 1
EPS12V CPU CABLE (8-PIN)
6 610mm 1
PCI-E CABLE
3 850mm 4
SATA CABLE
2 600mm 2
3 850mm 4
PERIPHERIAL CABLE
2 100mm 1
FLOPPY ADAPTER
NOTES:
• Floppy connectors are attached to the end of the peripheral cable.
• The ATX power connector has a detachable four-pin mechanism in order to support either a 24-pin or
a 20-pin socket on the motherboard.
• The EPS12V power connector has a detachable four-pin mechanism in order to support either an eight-pin
socket or a four-pin “P4/12V” socket on the motherboard.
Installation
Before proceeding with installation, please read this manual in its entirety.
Step A: Removing your existing power supply.
If you are building a new system, skip to Step B.
1. Disconnect the AC power cord from your wall outlet or UPS and from the
existing power supply.
2. Disconnect all the power cables from your video card, motherboard and all
other peripherals.
3. Follow the directions in your chassis manual and uninstall your existing
power supply.
4. Proceed to Step B.
Step B: Installing the Corsair Professional Series Gold power supply.
1. Make sure the power supply’s AC power cable is not connected.
To Next Page
Loading...
Need help?
General
