Corsair BUILDER CX400 - Page 7

7
BUILDERSERIES
™
Package Contents
• Corsair Builder Series power supply unit
• User Manual
• AC power cord
• Cable ties
• Mounting screws
• Corsair case badge
Corsair Cable Configuration
CMPSU-430CX
QTY Length Connectors/cable
1 600mm 1
ATX Cable (24-pin)
1 600mm 1
EPS12V CPU Cable (8-pin)
1 600mm 1
PCI-E Cable
2 550mmmm 2
SATA Cable
1 850mm 4
Peripherial Cable
CMPSU-500CX
QTY Length Connectors/cable
1 600mm 1
ATX Cable (24-pin)
1 600mm 1
EPS12V CPU Cable (8-pin)
2 600mm 1
PCI-E Cable
1 550mm 2
SATA Cable
1 700mm 3
1 1050mm 5
Peripherial Cable
CMPSU-600CX
QTY Length Connectors/cable
1 600mm 1
ATX Cable (24-pin)
1 600mm 1
EPS12V CPU Cable (8-pin)
2 600mm 1
PCI-E Cable
2 700mm 3
SATA Cable
1 1050mm 5
Peripherial Cable
NOTES:
• Floppy connectors are attached to the end of the peripheral cable.
• The ATX power connector has a detachable four-pin mechanism in order to support either a 24-pin or
a 20-pin socket on the motherboard.
• The EPS12V power connector has a detachable four-pin mechanism in order to support either an eight-pin
socket or a four-pin “P4/12V” socket on the motherboard.
Installation
Before proceeding with installation, please read this manual in its entirety.
Step A: Removing your existing power supply
If you are building a new system, skip to Step B.