GRAPHITE SERIES
®
780T
87
ENGLISH
5. Install 5.25" drive/device (ODD)
6. Install 2.5" SSD
First, remove the front panel 5.25" drive bay cover then
slide the ODD into the drive bay until the tool-free latch
clicks, securing the drive.
Note: To release an optical drive, push in the tool-free tab then
pull the drive outward.
Pull down the tab and place
the SSD into the tool-free
expandable SSD cage until
you feel it secure.
Note: To remove the SSD from the
cage, simply pull the tab down to
release.
7. Power the Case Fans
8. Connect the Front I/O Connectors
See your motherboard’s
manual for front panel header
locations and pin-outs.
USB 3.0
USB 2.0
HD AUDIO
POWER SW
RESET SW
HDD LED
POWER LED +
POWER LED -
1
2
3
1. Connect the SATA power
connector to the PSU SATA
power cable.
2. Connect the 3 or 4-Pin fan
connecter to the case fan
header.
3. Push the fan speed selector
button on your case to
toggle fan speed.
To Next Page
Loading...
