1 2
GETTING TO KNOW YOUR KEYBOARD
FACTORY RESET
To clear the onboard memory, hold the ESC key while plugging in the USB cable (L) to your system,
then release the ESC key after two seconds. The keyboard will then power on normally and be reset to
factory defaults.
Connect the detachable USB cable (L) to the keyboard USB Type-C port (H) and to an available USB 3.0 or
better Type-A port on your Windows
®
PC, Apple Mac
®
, or Microsoft Xbox One
®
.*
*www.corsair.com/xbox-one-support
SETTING UP YOUR KEYBOARD
ENGLISHENGLISH
A — DEDICATED MEDIA KEYS
B — CAPS AND SCROLL LOCK INDICATORS
C — PROFILE SWITCH KEY
D — BRIGHTNESS KEY
E — WINDOWS LOCK KEY
F — MUTE KEY
G — VOLUME ROLLER
H — USB TYPE-C PORT
I — TOURNAMENT SWITCH
J — FPS AND MOBA KEYCAP SETS
K — KEYCAP PULLER
L — DETACHABLE USB TYPE-C TO TYPE-A CABLE
C
D
E JF G
SOFTWARE MODE
Install iCUE on a Windows PC or Apple Mac to connect all of your CORSAIR iCUE
compatible products together in a single interface, giving you complete control
of everything from lighting to powerful macros. Download iCUE from
www.corsair.com/downloads.
When iCUE is running the keyboard operates in software mode and is controlled by iCUE.
HARDWARE MODE
With iCUE and the new dynamic profile system, you can create as many custom profiles
as can fit onto the 8MB of onboard storage. Each profile can store complex backlighting
effects (up to 20 layers), actions & macros, and settings.*
When iCUE is not running or the keyboard is connected to a device that does not support iCUE, the keyboard
operates in hardware mode which uses profiles and settings saved to the onboard storage.
*The number of lighting effects layers per profile and number of profiles that can be saved to onboard storage
will vary based on complexity.
K
L
H I
A B
To Next Page
Loading...
Need help?
General
Weight and Dimensions
