Corsair Link User Manual

Corsair Link Cooling & Lighting Kit.
Thank you for your purchase of Corsair Cooling & Lighting Kit.
Let’s go over the hardware included.
Hardware Content:
 Corsair Link Commander with internal USB connector
 1x Corsair Link Cooling Node
 1x Corsair Link Lighting Node

Corsair Link Specifications

General

Fan Control	Yes
RGB Control	Yes
Power Monitoring	Yes
LED Control	Yes
Temperature Monitoring	Yes
Category	Controller
Connectivity	USB
Software Support	Corsair Link
Software	Corsair Link

Summary

Corsair Link Commander Installation

Install Commander Unit and Connect to Motherboard

Mount the Commander in a 5.25" HDD bay and connect to a motherboard USB header.

Corsair Link Cooling Node Installation

Mount and Connect Cooling Node

Mount the Cooling Node and connect it to the Commander using a digital cable.

Connect Temperature Sensors

Plug temperature sensor cables into the Cooling Node's sensor ports.

Connect Fans to Cooling Node

Connect up to 5 fans (3-pin or 4-pin) to the Cooling Node's fan ports.

Corsair Link Lighting Node Installation

Mount and Connect Lighting Node

Mount the Lighting Node and connect it to the Commander using a digital cable.

Connect RGB LED Strips to Lighting Node

Connect RGB LED strips to the Lighting Node, using extension cables as needed.