IMPORTANT: The M75 WIRELESS gaming mouse must be fully charged before its
rst use.
Connect the mouse to an available USB 2.0 or 3.X port on your PC with the USB
CHARGING/DATA CABLE (P).
The RGB INDICATOR (D) on the mouse will begin pulsing green to denote battery
charging and will turn solid green when charging is complete.
SETTING UP 2.4GHz SLIPSTREAM WIRELESS
Hyper-fast sub-1ms wireless connection is designed for no-compromise gaming
grade performance.
Connect the USB WIRELESS RECEIVER (O) to an available USB 2.0 or 3.x port
located on the front panel of your PC or nearby USB port.
Power on your mouse by holding down on the POWER/WIRELESS MODE
BUTTON (H) for 5 seconds, or until the RGB INDICATOR (D) lights up.
The RGB INDICATOR (D) will blink white and turn solid white when connected.
If the RGB INDICATOR (D) is blue, press the POWER/WIRELESS MODE BUTTON
(H) once to swap to 2.4GHz mode.
Download the iCUE software from https://www.corsair.com/icue.
Run the installer program and follow instructions for installation.
If reconnection is required, initiate USB receiver pairing via USB cable and reconnect
on the iCUE software settings menu.
SETTING UP BLUETOOTH
To Next Page
Loading...
