To Next PageTo Next Page
Need help?Do you have a question about the Corsair XC7 RGB and is the answer not in the manual?
General| Type | CPU Water Block |
|---|---|
| Cold Plate Material | Copper |
| RGB Lighting | Yes |
| Socket Compatibility | LGA 1700, LGA 1200, LGA 115x, AM4 |
| Cooling Method | Liquid Cooling |
| Material | Copper |
| Included Accessories | Mounting hardware |
Attaching the Intel LGA-1200 backplate to the motherboard.
Preparing and securing the water block onto the motherboard.
Replacing the Intel bracket with the AMD AM4 bracket.
Adjusting bracket angle for mechanical/aesthetic reasons.
Identifying and connecting the RGB connector to controller/motherboard.
Downloading, installing, and configuring iCUE software for effects.
Checking compatibility with LGA-1200 and AM4 motherboards.
Compatibility with older Intel sockets like LGA-115X.
XC7 RGB requires a full custom water-cooling system.
XC7 RGB cold plate should not be mixed with aluminum.
Optimal flow direction is via the INLET port for best performance.
Thermal paste must be replaced for re-installation.
Connecting RGB directly to motherboard using adapter cable.
Maximum RGB devices per controller channel and recommendations.
