Cortex Multi Gym SM25 - Assembly Instructions; Step 1

8
IV. ASSEMBLY INSTRUCTIONS
ATTENTION:
1. The gasket shall be placed at both ends of the bolts (against the bolt head and nuts), unless otherwise stated.
2. Preliminary assembly is hand tightening of all bolts and nuts and hand tightening with the wrench for complete assembly.
3. Some spare parts have been pre-assembled by the factory.
4. It is strongly recommended this machine to be assembled by two or more people to avoid possible injury
STEP 1
| ASSEMBLY INSTRUCTIONS
85
83
1. Install part 5 to part 1 and 2 using:
- 4x Part 83
- 8x Part 85
- 1x Part 23
- 2x Part 74
- 2x Part 70
2. Repeat same steps for connecting
part 4 to parts 1 and 2.
74
70
M10 x 70mm Φ 10
M10 x 95mm M10
4pcs 16pcs
4pcs 8pcs
83
83
85
85
85
85
85
85
23
74
2
5
4
1
70