C-4 Reclining the Backrest
Backrest has 2 Positions
Backrest has an upright and
semi-reclined positions. The
semi-reclined position is to
be used only to install the
booster seat flush against
the vehicle seat back, if
needed.
1.
To Recline Backrest
Push firmly on the
backrest release tab
and rotate top of seat
back about 2.5 cm (1
in.) The backrest is now
in semi-recline mode.
2.
15
16
C. Basic Use
To Raise or Lower
Headrest
Grasp the top of the
headrest with one hand and
push down on the headrest
while pulling out on the
headrest adjustment lock
with the other.
Raise or lower headrest to
selected position. Release
the headrest adjustment
lock into one of headrest
heights. Check to make
sure the headrest is locked by push/pull headrest up and
down. Headrest will move slightly when it is locked.
C-3 Adjusting the Headrest Height
Headrest has Multiple
Headrest Positions
1.
3.
Check Headrest Height
Align the midpoint of
the child’s ears with the
midpoint of the headrest.
Adjust headrest if needed.
2.
4358-6864 Can Pronto ENG.indd 17-184358-6864 Can Pronto ENG.indd 17-18 1/13/16 2:29 PM1/13/16 2:29 PM
To Next Page
Loading...
