Page 9 of 19
Press any button.
End time
1. Select oven function and using or button select temperature.
2. press the Clock Functions button repeatedly until the symbol for End time flashes.
3. using the or button set the desired switch-off time.
The symbols for End time and Cook time light up.
The oven will automatically switch itself on.
By repeatedly pressing the Clock Funtions button,the current time can be called up.
When the time has elapsed, an audible signal sounds for 2 minutes.
The oven switches itself off.
“0.00”is displayed and the symbols for End time and Cook time flash.
To turn off the audible signal:
Press any button.
Cook time and End time combined
Cook time and End time can be used simultaneously,if the oven is to be switched on and off automatically
at a later time.
1. Select oven function and temperature.
2. using the Cook time function, set the time that the dish needs to cook,
e.g,1 hour.
3. using the End time function, set the time at whitch the dish is to be ready,
e.g. 14:05.
The symbols for Cook time and End time light up.
The oven switches on automatically at the time calculated,
e.g. 13:05.
When the set cooking time has elapsed, an audible signal sounds for 2 minutes.
The oven switches itself off,
e.g. 14:05.
Other Functions
Switching off the display
You can save energy by switching off the display.
Switching off the display
1. If required, Switch off the appliance using the On/Off button.
2. press the Clock Functions button and the button at the same time until the display goes out.
As soon as the appliance is switched on again, the display comes on automatically
When the appliance is next switched off, the display goes out again.
Switching on the display
1. If required, Switch off the appliance using the On/Off button.
2. press the Clock Functions button and the button at the same time until the display comes on again.
Child safety device
As soon as the child safety device is engaged, the appliance can no longer be switched on.
Activating the child safety device
1. If necessary, Switch on the appliance using the On/Off button.
No oven function must be selected.
2. press and hold the button until appears in the display.
The child safety device is now activated.
Deactivating the child safety device
1. To activate,Switch on the appliance using the On/Off button.
2. press and hold the button until disappears from the display.
The child safety device is now deactivated and the appliance is again ready for use.
Button Beep
Switching off button beep
1. Switch off the appliance using the On/Off button.
2. press and hold and buttons at the same time until a signal sounds (approx.2 seconds).
To Next Page
Loading...
Need help?
General
