To Next PageTo Next Page
Need help?Do you have a question about the Cosmo CPE and is the answer not in the manual?
Guidance on reading instructions before installation and operation for safety.
Product compliance with applicable European directives.
Defines symbols for DANGER, WARNING, CAUTION, and NOTE for safety instructions.
Specifies that only qualified personnel can install, commission, and operate the pump.
Lists regulations to be observed during installation, including accident prevention.
Warns against unauthorized modifications and use of non-original spare parts.
Provides instructions for unpacking, checking for damage, and storing the pump.
Presents technical specifications for the COSMO CPE pump, including voltage, temperature, and pressure.
Lists the items included in the pump package, such as the pump and accessories.
Defines the pump's purpose for warm water heating systems and approved fluids.
Describes the pump's components: hydraulic system, motor, and electronic control module with LED display.
Explains how to set and activate functions using the operating knob and LED display.
Explains variable differential pressure (Δp-v) and 3 speed stages control modes.
Provides detailed instructions for pump installation, including site selection, motor head rotation, and precautions.
Details the process of connecting the pump electrically, including safety warnings and required components.
Explains how to operate the pump using the operating knob for mode and setting selection.
Describes the procedure for filling the system and the automatic bleeding process of the pump.
Guides on setting control mode, delivery head, or speed stage using the knob, with display explanations.
Provides safety precautions for maintenance, troubleshooting common faults, and fault signal codes.
Emphasizes the importance of using original spare parts and how to order them.
Provides guidelines for the proper and environmentally friendly disposal of the product.
General