Cosmo CPH 2.0 User Manual

COSMO High-efficiency pump CPH 2.0 46
3. Fit nut and connector on the cable. Strip the wires as
indicated in the figure. Connect the wires to the terminal
board, respecting the phase, neutral and earth.
4. Insert the wired terminal board in the cable gland, securing it
with the side clips.
Screw on the locking nut.
5. Connect the wired connector to the pump, securing it with
the rear hook.
Connector available as spare part, KBN code: CPHEST

Cosmo CPH 2.0 Specifications

General

Brand	Cosmo
Model	CPH 2.0
Category	Water Pump
Language	English