COSMO High-efficiency pump CPH 2.0 50
Adjusting the pump operating mode
1 Minimum proportional pressure curve, PP1
2 Middle proportional pressure curve, PP2
3 Maximum proportional pressure curve, PP3
4 Minimum constant pressure curve, CP1
5 Middle constant pressure curve, CP2
6 Maximum constant pressure curve, CP3
7 Minimum constant curve, I
8 Middle constant curve, II
9 Maximum constant curve, III
adjustment ranges
e.g. Radiators
adjustment ranges
e.g. Underfloor heating
adjustment ranges
e.g. Filling the drinking water
tank