COSMO High-efficiency pump CPH 2.0 49
Display symbols:
The corresponding values are displayed for 3 seconds. The display goes off at the end of
the selection cycle – only the LED for the operating mode stays on.
If the mode selection key is pressed within 10 seconds, all 6 symbols are displayed, which
then returns to the standby mode.
If the mode selection key is pressed again within 10 seconds, further 11 display cycles
are shown to provide a longer reading time.
Instantaneous flow in m3/h
Instantaneous delivery head in m
Instantaneous power consumption in watts
Height of selected curve (1-2-3)
To Next Page
Loading...
