12 13
INSTALLATION INSTRUCTIONS
OPERATING INSTRUCTIONS
REGULATION OF BURNER FLAME INTENSITY
To regulate the minimum flame on the burners, carry out the
following procedure indicated below:
1) Turn on the burner and put the knob onto position MINIMUM (small
flame).
2) Remove the knob ( Fig. 9) of the tap which is set for standard pres-
sure. The knob is found on the shaft of the valve itself.
3) Beside the valve shaft, use a small screwdriver that fits the gold col-
ored screw found on the lower part of the tap (auxiliary, semi-rapid,
rapid Fig. 9) (dual fig.10) and turn the adjustment clock-wise or counter
clock-wise until the minimum flame reaches a desired intensity level.
4) Make sure that that the flame does not go out when changing the
position quickly from MAXIMUM to the MINIMUM position. If it does,
the minimum flame intensity needs to be increased.
WARNING
Keep appliance area clear and free from combustible materials,
gasoline and other flammable vapors and liquid.
• Do not store dangerous or flammable material in the cabinet areas
above appliance; store them in a safe place in order to avoid poten-
tial hazards.
• For safe use of appliance, do not use it for space heating.
• Do not use aerosol sprays in the vicinity of this appliance while it is in
operation For description of hotplates refer to installation instructions.
• This product is intended for the cooking of food and must not be
used for other purposes.
• Unstable or deformed pans should not be placed on the burners or
hot plates in order to avoid accidents caused by spill over.
• Added care should be taken when cooking with oil or fat.
• Always ensure that the knobs are in the "O" Off or Stop position when
the appliance is not in use.
• Before maintenance and cleaning, disconnect the appliance and al-
low cooling down.
• For reasons of hygiene and safety, this appliance must be regularly
cleaned and maintained.
• Ensure that air can circulate around the gas appliance. Poor ventila-
tion can result in lack of oxygen and extinguish the flame.
• The use of a gas cooking appliance produces heat and humidity in
the room where it is installed.
• The use of a gas cooking appliance produces heat and humidity in
the room where it is installed.
• The use of a gas cooking appliance produces heat and humidity in the
room where it is installed.
To Next Page
Loading...
Need help?
General
