Cosmo P 180 User Manual

1
0
Connection of the machine to the tractor:
• The third point hitch of the tractor and the fertilizer spreader must coincide or must be adapted.
• Make sure that the PTO shaft is engaged correctly after every linkage operation of the machine
and that it does not come uncoupled when the machine is lowered in order to fill the hopper up.
• In case of breaking or deterioration of the pto shaft protections, please replace them
immediately.
• When the machine is not linked to the power unit, the pto shaft must be placed on the
appropriate support.
• The presence of the machine can influence the manoeuvrability of the tractor, in particular
during transport.
Operation of the machine
• Make a check of the machine before switching it on. Start to work only if the machine is in
perfect conditions.
• Before using the machine, please be sure that all the safety devices are correctly placed and in
good state; in case of breakdowns or damages to the protections, please replace them
immediately.
ATTENTION! DANGER!
Check that the protections of the PTO shaft are complete and in
good conditions.
ATTENTION!
Do not come, for any reason, between the tractor and the
fertilizer spreader when the engine is running and the ppower
take-off is on.
ATTENTION!
During work, please be sure that for a radius of 50 meters there
are not any person or animals. When you work in proximity of
roads or public places, it is ABSOLUTELY OBLIGATORY to keep
away persons and to increase the precautions.

Cosmo P 180 Specifications

General

Brand	Cosmo
Model	P 180
Category	Spreader
Language	English