This document is a user's manual for the COSTWAY Wooden Sofa Set, 4 pieces, model HW63884. It provides detailed instructions for assembly, as well as care and maintenance guidelines for the furniture.
Function Description:
The COSTWAY Wooden Sofa Set is a 4-piece outdoor furniture set designed for relaxation and seating. It includes two single chairs, a loveseat, and a coffee table, providing a complete solution for outdoor living spaces. The set is designed to be assembled by two adults.
Important Technical Specifications:
- Model Number: HW63884
- Floor Area: 2MX2M (This indicates the recommended minimum space required for the assembled set).
- Assembly: Requires assembly by 2 adults.
- Hardware: The manual lists the following hardware components:
- M6 x 60mm Screws (7 pieces)
- M6 x 35mm Screws (1 piece)
- M6 x 70mm Bolts (11 pieces)
- M6 x 60mm Bolts (6 pieces)
- M6 x 50mm Bolts (12 pieces)
- M6 Nuts (10 pieces)
- M4 x 80mm Allen Key (2 pieces)
- Parts List: The furniture components are labeled A through N:
- A: 3 pieces
- B: 3 pieces
- C: 2 pieces
- D: 2 pieces
- E: 2 pieces
- F: 1 piece
- G: 1 piece
- H: 1 piece
- I: 1 piece
- J: 2 pieces
- K: 2 pieces
- M: 2 pieces (cushions for single chairs)
- N: 1 piece (cushion for loveseat)
Usage Features:
- Assembly Instructions: The manual provides a step-by-step guide for assembling the furniture, with clear diagrams for each step.
- Step 1: Attaching parts D to C using M6 x 60mm screws (1) and M6 x 70mm bolts (7). This step is performed twice.
- Step 2: Assembling the single chairs by connecting parts A, B, D, and E using M6 x 50mm bolts (5), M6 nuts (6), and M6 x 70mm bolts (3). This step is performed twice.
- Step 3: Placing the cushions (M) onto the assembled single chairs. This step is performed twice.
- Step 4: Assembling the coffee table by attaching part H to G using M6 x 60mm screws (1).
- Step 5: Attaching part F to G using M6 x 60mm screws (2).
- Step 6: Assembling the loveseat by connecting parts A, B, F, G, and H using M6 x 50mm bolts (5), M6 nuts (6), and M6 x 70mm bolts (3).
- Step 7: Placing the cushion (N) onto the assembled loveseat.
- Step 8: (No assembly shown, likely a visual of the completed loveseat with cushion).
- Step 9: Assembling the coffee table base by attaching parts J to I using M6 x 60mm bolts (4).
- Step 10: Connecting parts K to the assembled coffee table base (I and J) using M6 x 70mm bolts (3) and M6 nuts (6).
- Pre-assembly Checklist:
- Read each step carefully and follow the correct order to avoid assembly difficulties.
- Verify all parts are included by checking labels or stamps on raw edges.
- Work in a spacious area, preferably on a carpet, to prevent damage.
- Use hand tools only; power tools may scratch or damage parts.
- Contact Information: Provides email addresses for customer service in the US (cs.us@costway.com) and UK (cs.uk@costway.com) for assistance with missing or damaged parts.
Maintenance Features:
- General Care and Maintenance:
- Use a soft, clean cloth for dusting to avoid scratching the surface.
- Furniture polish is not necessary, but if used, test in an inconspicuous area first.
- Avoid using solvents, as they may damage the finish.
- Immediately blot liquid spills gently with a soft, clean cloth; avoid rubbing.
- Periodically check and tighten bolts/screws.
- Wood Furniture Care:
- Protect outdoor furniture with a cover when not in use to prevent long-term sunlight exposure damage.
- Wood and metal frames can suffer damage from extreme temperatures and humidity.
- Proper care and cleaning will extend the life of the furniture.
- Following these tips will enhance the furniture as it ages.
The manual also includes a "Welcome to visit our website and purchase our quality products!" section, highlighting benefits like Reward Points, Exclusive Customer Service, Personalized Recommendations, Permanent Shopping Cart, and Order History for customers visiting www.costway.com. It concludes with a "Thank You" message for customers.
To Next Page
Need help?
General
