To Next PageTo Next PageWhat to do if my Cotech JD2837-UK does not start?
If your Cotech Power Tool doesn't start, first check if there is power at the power point. If the outlet works, the issue might be worn brushes, a short circuit, or a faulty power switch. Contact us in case of motor or electrical faults.
Why is my Cotech JD2837-UK vibrating heavily?
Heavy vibration in your Cotech Power Tool is likely due to a loose blade. To resolve this, tighten the tool and ensure the blade is set correctly.
Why is my Cotech JD2837-UK running slowly?
Your Cotech Power Tool might be running slowly due to a dull or damaged saw blade, which requires replacement. Alternatively, the speed setting may be too low, so try altering the variable setting. Also, avoid pressing down too hard, as the motor may be overheated.
Precautions related to electrical hazards and tool usage.
Guidelines for personal protection and safe operation practices.
Instructions on proper usage, care, and maintenance of the tool.
Avoid contact with live wires to prevent electric shock.
Damaged mains leads require replacement by the retailer.
Keep hands clear of moving parts and the saw blade.
Avoid reaching under the workpiece during sawing.
Use only sharp, undamaged saw blades to prevent breakage.
Ensure correct settings and secure blade installation.
Wait for the blade to stop before removing the saw from the cut.
Mandates the use of safety glasses during operation.
Step-by-step guide for replacing the saw blade.
Instructions for tilting the footplate for angled cuts.
Solutions for the tool failing to power on.
Precautions related to electrical hazards and tool usage.
Guidelines for personal protection and safe operation practices.
Instructions on proper usage, care, and maintenance of the tool.
Avoid contact with live wires to prevent electric shock.
Damaged mains leads require replacement by the retailer.
Keep hands clear of moving parts and the saw blade.
Avoid reaching under the workpiece during sawing.
Use only sharp, undamaged saw blades to prevent breakage.
Ensure correct settings and secure blade installation.
Wait for the blade to stop before removing the saw from the cut.
Mandates the use of safety glasses during operation.
Step-by-step guide for replacing the saw blade.
Instructions for tilting the footplate for angled cuts.
Solutions for the tool failing to power on.
General| Brand | Cotech |
|---|---|
| Model | JD2837-UK |
| Category | Power Tool |
| Language | English |
