Need help?Do you have a question about the COUGAR DUOFACE PRO RGB and is the answer not in the manual?
Identifies the power button and RGB control functions.
Details the front panel's USB, audio, and other I/O connections.
Covers removable front panels and quick-release dust filters.
Details tempered glass side panels and the detachable top panel.
Describes the cable management bar and PCI slot covers.
Covers brackets for mounting fans and radiators in various locations.
Details the 3.5" HDD cage and 2.5" SSD trays.
Identifies the air filters for the top and bottom of the case.
Includes screws for mounting 3.5" HDDs and 2.5" SSDs.
Provides screws for motherboard installation and power supply units.
Includes motherboard standoffs, cable ties, and fan splitter cables.
Instructions for safely removing the front panel of the case.
Instructions for safely removing the left side panel.
Instructions for safely removing the right side panel.
Details supported radiator and fan sizes for top, front, and rear.
Information on installing fans on the PSU cover.
Detailed steps for installing fans and radiators at the top of the case.
Detailed steps for installing fans and radiators at the front of the case.
Instructions for removing the cable management bar for wider motherboards.
Instructions for installing or repositioning the cable management bar.
Guide for installing a graphics card in a horizontal orientation.
Guide for installing a graphics card in a vertical orientation.
Step-by-step instructions for installing 3.5" HDDs into the case.
Step-by-step instructions for installing 2.5" SSDs into the case.
How to use the RGB button to switch between preset lighting effects.
Steps to connect and enable RGB synchronization with the motherboard.
How to switch back from motherboard sync to preset lighting effects.
General| Type | Mid Tower |
|---|---|
| Expansion Slots | 7 |
| Maximum CPU Cooler Height | 160 mm |
| Cable Management | Yes |
| Color | Black |
| RGB Lighting | Yes |
| Motherboard Support | Mini ITX, Micro ATX, ATX |
| Material | Steel, Plastic |
| Drive Bays | 2 x 3.5" or 2 x 2.5" |
| I/O Ports | 2 x USB 3.0 |
| Water Cooling Support | Front: 240mm, Top: 240mm, Rear: 120mm |
| CPU Cooler Height Support | 160 mm |
| PSU Support | ATX |
To Next Page
