4. Important
IMPORTANT: Indicates general reference information
worthy of special attention.
SAFETY DECALS
This cutting machine is capable of amputating hands
and feet and throwing objects. Failure to observe the
following safety instructions could result in serious injury
or death.
The safety decals on your machine are visual reminders
of the important safety information found in this
manual. All messages found on your unit must be fully
understood and carefully followed. Safety decals found
on the machine are explained below.
Always replace missing or damaged safety decals.
Replacement decals can be found in the parts manual
for your machine and ordered from your dealer.
Refer to fig. 2 for safety decal locations.
Safety Rules
Page 4
SIGNAL WORDS
The safety alert symbols above and signal words below
are used on decals and in this manual.
Read and understand all safety messages.
1. Danger
DANGER: Indicates an IMMINENTLY
HAZARDOUS SITUATION! If not
avoided, WILL RESULT in death or
serious injury.
2. Warning
WARNING: Indicates a
POTENTIALLY HAZARDOUS
SITUATION! If not avoided, COULD
RESULT in death or serious injury.
3. Caution
CAUTION: Indicates a
POTENTIALLY HAZARDOUS
SITUATION! If not avoided, MAY
RESULT in minor or moderate
injury. It may also be used to alert
against unsafe practices.
Read these safety rules and follow them closely. Failure
to follow these rules could lead to loss of control of unit,
severe personal injury or death to you or bystanders or
result in damage to property or the machine.
WARNING: This cutting machine is
capable of amputating hands and
feet and throwing objects. Failure to
observe the safety instructions in the
manuals and on decals could result in
serious injury or death.
Safety Alert Symbols
These are safety alert symbols. They
mean:
•ATTENTION!
•YOURSAFETYIS
INVOLVED!
When you see this symbol:
•BECOMEALERT!
•OBEYTHEMESSAGE!
1
1
3
2
4
fig. 2
To Next Page
Loading...
Need help?
General
