EasyManua.ls Logo

Countax A20/50 User Manual

Countax A20/50
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OPERATORS MANUAL
SPECIFICATION SUMMARY
Engine Lubricant
1.7 litres
Recommended SAE30 or 10W - 30 high quality
detergent oil classified for service; SG, SF, SE.
Read and follow the instructions in the engine
manufacturer’s handbook.
Fuel Tank Capacity
7 litres (1.5 gallons)
Transmission
Tuff Torq Heavy Duty Hydrostatic K62,
infinitely variable speed control with
Diff lock. Sealed for life lubrication.
Dimensions (approx.)
Length 1.96m (78”)
Inc Sweeper 3.07m (121”)
Height 1.17m (46”)
Width 1.3m (51”) (excluding Deck)
Weight
A20/50 325Kg
Sweeper 62Kgs
Net 36Kgs
PGC Capacity
390 litres
Forward Speeds
0-7mph
Countax Limited, Countax House, Great Haseley, Oxford OX44 7PF
Tel: (01844) 278800 Fax: (01844) 278792
Email: email@countax.com Website:www.countax.com
®
All figures are approximate. We reserve the right to change specification and price without notice E&OE
© copyright 2002 Countax Limited
Turning Radius
125cm
Recommended Tyre Pressure
FRONT
0.8-1.1KgF/cm (12-16lb PSI)
REAR
0.43-0.7KgF/cm (6*-10lb*PSI)
* Pressure recommended for maximum grip.
NEVER INFLATE ABOVE THE
MAXIMUM PRESSURE SHOWN
A20-50
196cm (78”)
130cm (51”)
120cm (47.7/4”)
MODEL
ENGINE DISP
BORE
STROKE
Briggs & Stratton
570cc
72mm
70mm
A20/50
POWER
TORQUE
Vanguard OHV
14.9kw 20hp
@3600 rpm
39.5NM
@3600rpm
A20/50
Version 3.0
Garden Tractor
®
Britain’s Best Selling Range of Garden Tractors
Question and Answer IconNeed help?

Do you have a question about the Countax A20/50 and is the answer not in the manual?

Countax A20/50 Specifications

General IconGeneral
BrandCountax
ModelA20/50
CategoryLawn Mower
LanguageEnglish

Summary

Safety Instructions

Mandatory Safety Instructions for Operation

Outlines essential safety precautions for operating the garden tractor.

Preparation

Covers pre-operation checks and safety measures.

Operation

Safe Operating Procedures

Details how to safely operate the tractor under various conditions.

Maintenance and Storage

Provides guidance on maintaining and storing the tractor.

Controls and Indicators - Dashboard

Ignition Control

Explains the function of the key start ignition switch.

Cutter On/Off Switch

Details the operation of the electromagnetic blade clutch switch.

Throttle Control

Explains how to adjust the engine speed using the throttle lever.

Safety Switches

Covers the seat and brake pedal safety switch functions.

Controls - Forward/Reverse

Footpedal Controls and Moving Off

Explains the operation of forward and reverse foot pedals.

Reversing Procedure

Details the steps for safely reversing the tractor.

Parking Brake Operation

Describes how to engage and disengage the parking brake.

Controls - Levers

Engine General Maintenance

Engine Oil Maintenance

Oil Draining Procedure

Step-by-step guide on how to drain engine oil.

Refilling Engine Oil

Instructions for refilling the engine with the correct oil.

Cutter Deck Troubleshooting Checklist

Cutter Fails to Start or Cuts Out

Lists checks for when the cutter won't operate.

Uneven Cut - One Side Shorter

Troubleshooting steps for uneven cutting on one side.

Uneven or Untidy Cut

Checks for general unevenness or untidiness in the cut.

Cutter Loses Power / Belt Slips

Diagnosing issues causing power loss and belt slippage.

Deck Levelling - Front to Back

Levelling Deck Front to Back

Instructions for adjusting the deck height from front to back.

Cutter Levelling - Side to Side

Levelling Cutter Side to Side

Procedure for adjusting the cutter deck level from side to side.

Collector Drive Belts

PTO Drive Belt Connection and Tensioning

How to connect and tension the PTO drive belt for the collector.

Correct Belt Tension Measurement

Method for checking the correct belt tension.

Side Drive Belt Checks and Replacement

Procedures for checking and replacing side drive belts.

Cutter Drive Belt

Engine to Cutter Drive Belt Tensioning

Instructions for correctly tensioning the engine to cutter drive belt.

Collector Adjustments

Adjusting Sweeping Height

How to set the optimal height for the collector brushes.

Engine Oil Service

Engine Oil Draining and Refilling

Comprehensive guide for changing engine oil.

Related product manuals