To Next PageTo Next Page
Need help?Do you have a question about the Country Clipper Jazee two and is the answer not in the manual?
Identifies common accident scenarios and their causes to prevent injury.
Provides essential guidelines for safe operation, adjustment, and servicing of the mower.
Explains the safety switches interlocked with mower functions for operator protection.
A pre-operation checklist to ensure the mower is ready and safe for use.
Identifies and illustrates the location of controls for joystick-operated models.
Detailed instructions on how to operate the mower using joystick controls.
Identifies and illustrates the location of controls for twinstick operated models.
Detailed instructions on how to operate the mower using twinstick controls.
A schedule outlining required maintenance tasks at specific intervals.
Instructions for engine maintenance, referring to the engine manufacturer's manual.
Procedures for checking and maintaining the mower's battery.
Information regarding tire pressure and maintenance.
Instructions for checking, sharpening, and balancing mower blades.
Guidance on checking and replacing V-belts.
Lubrication points and schedule for engine and deck spindles.
Steps for adjusting the parking brake linkage for proper function.
Procedure to adjust the neutral position of the joystick control lever.
How to adjust the sideways turning response of the joystick control.
Adjusting the detent mechanism for proper locking of the joystick lever.
Adjusting the neutral position of the twinstick control levers.
Aligning the forward and reverse positions of the twinstick control handles.
Steps to ensure the mower travels straight when controls are in the forward position.
Maintenance checks for hydrostatic transmission cooling fins and general care.
Instructions for changing the fluid in the hydrostatic transmission for Jazee Two models.
Procedures for purging air from the hydrostatic system after maintenance.
Step-by-step guide for lifting the mower deck for servicing.
Step-by-step guide for safely lowering the mower deck after servicing.
Troubleshooting steps for when the engine fails to crank.
Troubleshooting steps for when the engine cranks but does not start.
Solutions for engines that are difficult to start.
Diagnosing and fixing issues where the engine runs intermittently.
Identifying causes and solutions for engine knocking sounds.
Troubleshooting intermittent engine skipping at higher speeds.
Causes and solutions for engine overheating.
Addressing issues with the engine's performance at idle.
Troubleshooting and fixing engine backfire problems.
Diagnosing why the mower does not move forward despite the engine running.
Identifying causes for power loss or transmission overheating.
Troubleshooting why the engine stalls when the mower blades are engaged.
Diagram and information for the hydrostatic transmission drive belt routing.
Diagram and information for the deck drive belt routing.
General| Cutting Width | 48 inches |
|---|---|
| Cutting Height | 1.5 - 4.5 inches |
| Turning Radius | Zero-Turn |
| Deck Material | Steel |
| Drive System | Rear-wheel drive |
| Warranty | 3 years |
