Country Clipper Jazee

To Next Page

Safety Instructions & Operators Manual

Zero Turn Radius Mower

™

Congratulations for buying a Country Clipper product. Your Country Clipper Zero Turning Radius

Riding Mower was designed and built to provide long and trouble free service. Keep in mind that it, like

any other mechanical device, can be potentially dangerous if used improperly, and hazard control and

accident prevention are dependent upon the awareness, concern, prudence, and proper training of

personnel involved in the operation, transport, maintenance, and storage of the equipment. Study this

manual and pay special attention to the important Safety Precautions on pages 4-6. Following these

instructions will help you continue to enjoy the trouble-free performance expected of the Country Clipper

product.

P-11627 (10-04)

Main Page

Need help?

Do you have a question about the Country Clipper Jazee and is the answer not in the manual?

Summary

SAFETY

Accident Patterns to Avoid

Lists common accident causes like blade contact, object propulsion, and overturning.

Safety Instructions and Recommendations

Provides essential safety guidelines for operating, adjusting, and servicing the mower.

Safety Interlock System

Explains safety switches and their interlock functions for safe operation.

START UP AND OPERATION

Checklist Before Operation

MAINTENANCE

Maintenance Schedule

Outlines the required maintenance tasks and their frequency for the mower.

Maintenance Instructions

Procedure for Raising and Lowering the Deck for Servicing

Leveling the Deck

TROUBLE SHOOTING CHECK LIST

Engine Wont Turn Over

Addresses issues where the engine fails to crank or turn over.

Engine Will Turn Over But Wont Start

Diagnoses problems when the engine cranks but does not ignite.

Hard to Start Engine

Engine Starts But Cuts Out

Engine Knocks

Engine Sometimes Skips at Higher Speeds

Engine Over Heated

Engine Runs But Mower Wont Move Forward

Solves problems where the engine runs but the mower does not move.

Mower Loses Power or Transmissions Over Heats

Engine Stalls When Blades Are Engaged

Diagnoses why the engine stops when the mower blades are activated.