EasyManua.ls Logo

Country Clipper 2504M - User Manual

Country Clipper 2504M
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Safety Instructions & Operators Manual
COUNTRY CLIPPER
2204M, 2304M, 2504M AND 2304KA
Zero Turn Radius Mower
Congratulations for buying a Country Clipper product. Your Country Clipper Zero Turning Radius
Riding Mower was designed and built to provide long and trouble free service. Keep in mind that it, like
any other mechanical device, can be potentially dangerous if used improperly, and hazard control and
accident prevention are dependent upon the awareness, concern, prudence, and proper training of
personnel involved in the operation, transport, maintenance, and storage of the equipment. Study this
manual and pay special attention to the important Safety Precautions on pages 4-6. Following these
instructions will help you continue to enjoy the trouble-free performance expected of the Country Clipper
product.
P-11402 (8/00)
Question and Answer IconNeed help?

Do you have a question about the Country Clipper 2504M and is the answer not in the manual?

Summary

SAFETY

ACCIDENT PATTERNS TO AVOID

Lists common accident causes for riding mowers to prevent injury.

SAFETY INSTRUCTIONS AND RECOMMENDATIONS

Provides essential safety guidelines and practices for operating the mower.

SAFETY INTERLOCK SYSTEM

Explains the safety features interlocked with switches for user protection.

START UP AND OPERATION

CHECKLIST BEFORE OPERATION

Lists essential checks to perform before starting the mower for safe operation.

CONTROL LOCATIONS

Identifies and explains the location and function of all machine controls.

OPERATION

Details the step-by-step procedure for starting and operating the mower.

BRAKING

Explains how to safely brake the mower using the joystick and parking brake.

CUTTING HEIGHT ADJUSTMENT

Describes how to adjust the mower deck cutting height for desired grass length.

ENGAGE MOWER BLADE CLUTCH

Details the procedure for engaging the mower blades safely.

TO STOP

Provides the complete sequence for safely shutting down the mower.

MOWING RECOMMENDATIONS

SPECIFICATIONS

MAINTENANCE

MAINTENANCE SCHEDULE

Outlines the recommended maintenance tasks and their frequency.

MAINTENANCE INSTRUCTIONS

Provides detailed instructions for performing various maintenance tasks.

ENGINE

Provides maintenance details for the engine, referring to the manufacturer's manual.

BATTERY

Details care and maintenance procedures for the mower's battery.

TIRES

Explains the importance of tire pressure and lists recommended values.

MOWER BLADES

Describes how to check, sharpen, and replace mower blades.

V-BELTS

Covers inspection and replacement of V-belts for the mower.

LUBRICATION

Details lubrication points and schedules for various mower components.

PARKING BRAKE ADJUSTMENT

Provides instructions for adjusting the parking brake mechanism.

JOYSTICK CONTROL LEVER NEUTRAL ADJUSTMENT

Guides on adjusting the joystick for proper neutral positioning.

JOYSTICK CONTROL LEVER DETENT ADJUSTMENT

Explains how to adjust the joystick detent for secure engagement.

JOYSTICK CONTROL LEVER SENSITIVITY ADJUSTMENT

Details how to adjust joystick sensitivity for optimal control.

ADJUSTING FOR STRAIGHT FORWARD TRACKING

Instructions for aligning the mower to track straight while moving forward.

HYDROSTATIC TRANSMISSIONS

Covers checking and maintaining hydrostatic transmission cooling fins and fluid.

HYDROSTAT DRIVE BELT REPLACEMENT PROCEDURE

Step-by-step guide for replacing the hydrostat drive belt.

PROCEDURE FOR RAISING AND LOWERING THE DECK FOR SERVICING

RAISING THE DECK

Instructions on how to safely lift the mower deck for maintenance.

LOWERING THE DECK

Instructions on how to safely lower the mower deck after servicing.

LEVELING THE DECK

TROUBLE SHOOTING CHECK LIST

ENGINE WONT TURN OVER

Lists potential causes and solutions when the engine fails to crank.

ENGINE WILL TURN OVER BUT WONT START

Troubleshooting steps for when the engine cranks but doesn't fire.

HARD TO START ENGINE

Addresses common issues causing difficulty in starting the engine.

ENGINE STARTS BUT CUTS OUT

Solutions for engine stalling or cutting out after starting.

ENGINE KNOCKS

Identifies causes for engine knocking and how to resolve them.

ENGINE SOMETIMES SKIPS AT HIGHER SPEEDS

Troubleshooting steps for engine skipping at higher RPMs.

ENGINE OVER HEATED

Diagnoses and solutions for engine overheating issues.

ENGINE IDLES POORLY

Addresses problems related to the engine idling poorly.

ENGINE BACKFIRES

Explains causes and fixes for engine backfiring.

ENGINE RUNS BUT MOWER WONT MOVE FORWARD

Troubleshooting for mower not moving forward despite the engine running.

MOWER LOSES POWER OR TRANSMISSIONS OVER HEATS

Solutions for power loss or transmission overheating.

ENGINE STALLS WHEN BLADES ARE ENGAGED

Addresses engine stalling when mower blades are engaged.

WIRING SCHEMATIC

WIRING SCHEMATIC: 22, 23 & 25 H.P. MODELS

Detailed wiring diagram for the 22, 23, and 25 H.P. models.

Country Clipper 2504M Specifications

General IconGeneral
BrandCountry Clipper
Model2504M
CategoryLawn Mower
LanguageEnglish

Related product manuals