Courtyard Creations KSS100V-WM User Manual

ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
KSS100V-WM
PARTS LIST
PART
NO.
MATERIAL CODE PART Q’TY
PART
NO.
MATERIAL CODE PART Q’TY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
8
2
10
1
1
1
1
2
1
1
1
1
1
1
2
2
2
2
2
1
2
4
2
8
10
4
18
4
KSS1008-CS01
KSS1008-CS02
KSS1004-CS02
KSS1008-CS04
KSS1008-CS05
KSS1004-CS03
KSS1004-CS04
KSS1008-CS08
17C01A0844061Y4
17C01A0756131Y4
17C01A0716072Y4
17C17A1306001Y4
17FA05040301-Y4
17FA08060601-Y4
1800C23001
17D03A040401-Y4
1800337002
17KAB1101----Y4
17KAA0201----Y4
61K100VC00001BA
61K100VC50001BA
61K100VJ00001BA
61K100VG00008IA
61K100VQ00008IA
KSS1004-CS05
KSS100V-CS01
KSS1004-CS07
KSS1004-CS08
SEAT BASE
SEAT BASE
MIDDLE SEAT
BACK A
BACK B
MIDDLE LEG
LEG
SEAT CROSS BRACE
BOLT M8*95
BOLT M6*48
BOLT M6*45
SCREW ST4.2*16
WASHER d6.5*D13*1.0
WASHER d8.5*D17*1.6
PLASTIC NUT M6*P1.0
JAM NUT M8*1.25
BOLT CAP M6
NUT WRENCH 10 & 13MM
HEX.KEY WRENCH 6MM
LEFT CUSHION
RIGHT CUSHION
PILLOW
COVER BAG
COVER
UMBRELLA
LOWER CENTER PLUG
BOTTOM POLE
TABLE TOP
Do not discard any of the packaging until you have checked that you have all the parts and pack of fittings.
Keep children away during assembly. This item contains small parts which can be swallowed by children. Children should always
be under direct adult supervision while using the product.
Retain the assembly instructions for future reference.
Please quote following FQC NO. when contacting service center.
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
COURTYARD CREATIONS INC.
!
!
!
!
STOP DON’T RETURN TO STORE!
PAGE 1 OF 5

Courtyard Creations KSS100V-WM Specifications

General

Brand	Courtyard Creations
Model	KSS100V-WM
Category	Outdoor Furnishing
Language	English

Summary

Assembly Instructions

Step 1: Fasten Middle Leg

Fasten middle leg (#6) to middle seats (#3) using bolts (#9), washers (#14), and jam nuts (#16). Do not fully tighten.

Step 2: Insert Seat Bases into Middle Seats

Insert seat bases (#2) into middle seats (#3), ensuring holes align. Repeat for both sides.

Step 3: Insert Seat Bases into Seat Bases

Insert seat bases (#2) into seat bases (#1), ensuring spring clips go through holes.

Step 4: Connect Seat Bases and Legs

Connect seat base tabs to legs, attach middle seats to seat bases, and fasten middle leg to legs.

Continue Assembly Steps

Step 5: Fasten Back A

Fasten back A (#4) to the middle seat (#3) using bolts (#10). Ensure label mark 'A' faces upwards.

Step 6: Attach Seat Cross Brace and Backs

Fasten seat cross brace (#8) to back A (#4) and seat base (#1) using bolts (#11), washers (#13), and plastic nuts (#15).

Table Assembly

Step 7: Insert Bottom Pole into Table Top

Insert the bottom pole (#27) into the upper center plug on the table top (#28).

Step 8: Insert Bottom Pole into Lower Center Plug

Insert the bottom pole (#27) into the lower center plug (#25).

Step 9: Secure Table Top Assembly

Tighten lower center plug (#25), press button on table top plug, and insert into lower center plug.

Step 10: Attach Table to Middle Leg

Insert the assembled table with bottom pole into the hole in the middle leg (#6).

Final Assembly and Usage

Step 11: Insert Umbrella

Insert the umbrella (#26) into the bottom pole (#27), ensuring spring clips go through holes.

Step 12: Place Cushions and Cover

Place cushions (#20, #21) and pillows (#22) on lounge. Secure cover bag (#23) with velcro.

Functionality: Turning Lounge into Bed

Press spring buttons on seat cross braces (#8) to recline backs into two positions.

Special Warnings and Maintenance

Includes inspection, positioning, tightening, weight limit, cleaning, and off-season storage advice.