Need help?Do you have a question about the Coustic AMP1200S and is the answer not in the manual?
Connect the amplifier to the vehicle battery using appropriate gauge wire and a fuse for maximum performance.
Connect the amplifier's remote turn-on terminal to the source unit's remote output or a switched 12V source.
Securely connect the amplifier's ground cable to a clean metal point on the vehicle chassis for proper grounding.
Describes the function of the high-pass, low-pass, and full-range filter settings for speaker configuration.
Details the adjustable crossover frequencies for high-pass and low-pass filters between 40 and 350 Hz.
Explains how to use the bass boost control for enhanced bass performance, noting power cost.
Troubleshooting steps for an amplifier that does not power on, checking connections and fuses.
Addresses troubleshooting for an amplifier with power but no sound output, checking signal and speaker connections.
Provides steps for diagnosing an amplifier that turns on and then shuts off, checking speakers and thermal protection.
Troubleshooting guide for loss of sound on one channel, checking connections and balance controls.
Explains how to troubleshoot low sound levels from various sources by checking fader and input sensitivity.
Addresses amplifier shutdown issues, possibly due to thermal protection or speaker impedance.
Explains indicators for low/high voltage and troubleshooting steps for intermittent power issues.
Diagnoses and resolves whining noises related to ground loops or RCA cables by checking connections.
General| Brand | Coustic |
|---|---|
| Model | AMP1200S |
| Category | Car Amplifier |
| Language | English |
To Next Page
