Need help?Do you have a question about the Coustic AMP800S and is the answer not in the manual?
Connect the amplifier to the battery using appropriate gauge wire and fuse.
Connect the remote turn-on wire from the source unit or a switched 12-volt source.
Ensure a secure, clean metal-to-metal ground connection to the vehicle chassis.
Explains the function and mounting location of the remote gain control.
Describes connecting RCA or high-level inputs for signal transmission to the amplifier.
Final step to reconnect the battery ground after verifying all connections.
Steps to diagnose power issues, including voltage and fuse checks.
How to resolve issues when the amplifier powers on but produces no sound.
Diagnosing causes for the amplifier intermittently turning on and off.
Steps to fix a lack of sound from one channel of the amplifier.
Addresses low audio output by checking fader and input sensitivity.
Investigating thermal protection or speaker impedance for shutdowns.
Troubleshooting voltage-related issues indicated by amplifier LED status.
Diagnosing and resolving ground loop or RCA cable interference noise.
General| Brand | Coustic |
|---|---|
| Model | AMP800S |
| Category | Car Amplifier |
| Language | English |
To Next Page
