Cove DW2450 - Page 30


828019 REV B 08/2023
DW2450 and DW2450WS Service Manual
service.subzero.com 800.222.7820
Exterior Component Removal and Installation
MAIN CONTROL MODULE INSTALLATION
After installing the main control module, install:
Rear insulation
CONNECT THE MCM
Connect the wire harnesses to the MCM.
INSTALL THE MCM
Install the MCM into the unit.
Use a
1
/
4
" socket to install the MCM mounting
screws.
REAR ACCESS COVER REMOVAL
To remove the rear access cover, first uninstall the unit.
Then, remove:
Rear insulation
REMOVE THE REAR ACCESS COVER
Use a
1
/
4
" socket to remove the rear access cover
mounting screw.
Remove the rear access cover from the unit.
REAR ACCESS COVER INSTALLATION
After installing the rear access cover, install:
Rear insulation
INSTALL THE REAR ACCESS COVER
Install therear access coveronto the unit.
Use a
1
/
4
" socket to install the rear access cover
screw.
1
1
1
2
1
1
2
1
1
2
30