Work Period
Allows you to set multiple work periods (A/B) for your camera. When off the camera will function all the time. When
ON, the camera will only function during the designated time periods.
Time Lapse
Set the work period and interval of your time scan. Set your work period to when you want your camera to function.
Set your interval to how often you would like your camera to take an image.
Interval options are: 1 min.- 59 min., 1 hour – 6 hours.
Night Image
On the night image screen, you will have three options to choose from Short Range, Fast, and Long Range.
Short Range: The camera will dim the brightness of the LED’s when a picture is taken so the reflection off of the subject
is not overly bright.
Long Range: The camera will increase the brightness of the LED’s when a picture is taken so you can clearly see the
subject of the image from a distance.
Fast Mode: This mode will optimize the camera for when the subject of the image is moving at a quick pace. When in
the mode, the camera will adjust the shutter speed to minimize motion blur.
Sensor Level
Adjust the sensitivity of your PIR sensor. Four options: Low, Normal, High, Auto.
Low: The camera will only trigger from major movements
Normal: The camera will trigger at a normal rate.
High: The camera will take pictures whenever movement is detected.
Auto: The camera will dynamically change the sensitivity based on the temperature around the unit. In cold
temperatures, the unit will increase the sensitivity to optimize captures. In warm temperatures, the camera will
decrease sensitivity to decrease the number of false triggers.
As the temperature around the camera changes, warms up throughout the day, your sensitivity will change as well.
Auto is our recommended setting.
Password
The password screen allows you to set a pin code to be able to change the settings of your camera. To set the password,
select ON, then change the four-digit PIN to a unique password that you will use to open the camera. Once the
password is set, each time you go to the camera, you will be prompted to enter the PIN before opening the menu.
If you forget your password, please contact Covert Scouting Cameras at support@dlccovert.com, call 270-743-1515 or
use our online chat option to request an RA #. We require warranty registration to verify your camera. This must be
completed within 10 days after your purchase. Proof of purchase will be required.
To Next Page
Loading...
