Why does my Coway Airmega 250 have a bad smell coming from the air outlet?
A bad smell from the air outlet may indicate that the filter needs cleaning or replacement. Check the filter cleaning and replacement cycle, and then clean or replace the filter if necessary.
What to do if no air comes out of my Coway Airmega 250?
If no air is coming out of your Coway Air Cleaner, ensure the power plug is connected to a functioning AC power outlet (220 V - 240 V~ 50 Hz, 60 Hz). Also, make sure the unit is turned on by touching the [Power] button. If there was a power outage, wait until power is restored before attempting to use the product.
Why is the air speed from my Coway Airmega 250 Air Cleaner significantly low?
A significantly low air speed from your Coway Air Cleaner may indicate that the filter needs cleaning or replacement. Confirm the filter cleaning and replacement cycle, and then clean or replace the filter if necessary.
What to do if the pollution level does not change on my Coway Air Cleaner?
If the pollution level on your Coway Air Cleaner isn't changing, it could be due to a polluted pollution sensor lens. Clean the pollution sensor. Alternatively, you can try adjusting the pollution sensor’s sensitivity.
Why does my Coway Air Cleaner smell bad?
If you notice a bad smell coming from the air outlet of your Coway Air Cleaner, you should check the filter cleaning and replacement cycle. Clean or replace the filter if it's necessary.
Why is the air speed from my Coway Airmega 250 Air Cleaner so low?
If the air speed from your Coway Air Cleaner's outlet is significantly low, you should check the filter cleaning and replacement cycle. Clean or replace the filter if necessary.
General| Brand | Coway |
|---|---|
| Model | Airmega 250 |
| Category | Air Cleaner |
| Language | English |
Airmega's sensor shows indoor air quality via LED bar and particle size classification.
Product automatically adjusts fan speeds based on room's air quality and conditions.
Provides essential safety tips and warnings for operating the product.
Detailed explanation of each button and indicator on the control panel.
Guide to removing filter plastic wrapping and installing it correctly.
Instructions for plugging in the power cord and turning on the air purifier.
Product automatically adjusts air speed based on current air quality levels.
Operates at maximum performance for faster purification, switching to smart mode later.
Recommended maintenance cycles for filters and cleaning schedule for product parts.
Step-by-step guide on how to clean the pre-filter.
Common issues and solutions for air outlet, speed, pollution level, and smell.
To Next Page
