To Next PageTo Next PageHow to fix low airflow on a Coway Air Cleaner?
If the airflow speed from your Coway Air Cleaner's air outlet is significantly low, confirm the filter cleaning and replacement cycle, and then clean or replace the filter if necessary.
What to do if my Coway Airmega ProX Air Cleaner is not blowing air?
If your Coway Air Cleaner isn't blowing air, ensure the power plug is connected to a 120 V~ 60 Hz AC power outlet. Also, make sure the product is turned on by touching the [Power] button. If there was a power outage, wait until the power is restored before attempting to use the product.
What to do if the pollution level on my Coway Airmega ProX doesn't change?
If the pollution level on your Coway Air Cleaner isn't changing, try cleaning the pollution sensor. Also, you can adjust the pollution sensor’s sensitivity.
Why does my Coway Airmega ProX smell bad?
If your Coway Air Cleaner emits a bad smell, confirm the filter cleaning and replacement cycle, and then clean or replace the filter if necessary.
General| Filtration System | Pre-filter, Activated Carbon Filter, Green HEPA Filter |
|---|---|
| Filter Life (Activated Carbon Filter) | 12 months |
| Filter Life (Green HEPA Filter) | 12 months |
| Air Quality Sensor | Yes |
| Auto Mode | Yes |
| Sleep Mode | Yes |
| Fan Speeds | 5 |
| Product Type | Air Purifier |
| Coverage Area | 1560 sq. ft. |
| Filter Type | Pre-filter, Activated Carbon Filter |
| Filter Life (Pre-filter) | Washable and Permanent |
Basic steps to prepare the air purifier for first-time use.
Detailed instructions for removing, unwrapping, and correctly installing filters.
Critical warnings and cautions for safe operation and to prevent hazards.
Explains the function of each indicator light and the light sensor on the panel.
Details the operation of the Power, Mode, Airflow speed, and PM information buttons.
Automatic airflow adjustment and sleep mode based on environmental conditions.
Energy-saving mode that pauses purification when air quality is consistently good.
Operation mode optimized for quiet and comfortable use with reduced noise.
High-speed purification mode for rapid air cleaning, consuming more power.
Manual airflow selection and settings for indicator lights and panel lock.
Alerts the user if product covers are not properly installed, stopping operation.
Table mapping PM levels to air quality tiers (Good to Very Unhealthy).
Explains filter usage indicators and how to reset them after cleaning or replacement.
Procedure to manually reset filter usage status before the notification appears.
Step-by-step instructions for replacing the Max2 filter unit.
Instructions for cleaning the pre-filter using vacuum or water.
Provides solutions for common problems like no airflow, low airflow, or bad smells.
Details the limited warranty terms, coverage, and exclusions for North America.
Steps for contacting Coway and submitting a warranty claim.
Explains the binding arbitration process and opting out of it.
Specifies location options for arbitration hearings based on claim value.
Instructions on how to decline the arbitration process and retain other rights.
