Coway AP-1019C Manual

16
15
Tips
- Always unplug the power cord before cleaning the lter.
- The pre-lter can be restored by removing dust or washing with water.
- Failure to clean the pre-lter for a long time may result in poor product performance.
- The HEPA lter and deodorization lter cannot be restored by cleaning.
Never wash these lters with water.
■ Pre-lter (every two weeks)
When the pre-lter alarm sounds, start cleaning.
1. The pre-lter can be easily removed without disassembling
the product.
Pull the Pre-lter handle to take it out.
∗
Be careful not to let dust fall o when removing.
2. Remove dust with a vacuum cleaner or water depending on
the degree of pollution.
∗
Be careful not to let dust fall inside the product when cleaning.
3. Assembling with one touch is convenient.
After the pre-lter is completely dried, push it completely to the
end of product.
4. Reset the alarm by pressing the lter reset button for 3 seconds.
3 sec.
HOW TO CLEAN
Maintenance

Coway AP-1019C Specifications

General

Brand	Coway
Model	AP-1019C
Category	Air Cleaner
Language	English