Tips
- Always unplug the power cord before cleaning.
- Do not use organic solvents (thinner, etc.), bleach, or detergents containing
chlorine or abrasives to clean the product.
- Do not immerse the product in water or spray water on it.
HOW TO CLEAN
■ How to Clean Pollution Sensor (every two months)
1. Use a soft brush or vacuum cleaner to clean the air inlet and the air
outlet of the pollution sensor.
∗
Be careful not to let dust fall inside the product when cleaning.
2. Open the pollution sensor cover at the rear top of the product.
(Use the grove of the pollution sensor’
cover to open the cover)
Soak a cotton swab in water and wipe o
the lens, the dust inlet and outlet, then
wipe it o with dry cotton swab to
remove moisture from it.
∗
Performance of pollution detection sensor may
decrease if not cleaned regularly.
∗
Clean more often in environment with heavy dust presence.
■ How to Clean Front Cover
Use a soft cloth or brush to wipe o dusts on the surface of the front cover.
∗
Use slightly wet cloth to wipe when contamination is high
(Do not use abrasive).
■ How to Clean Main Body of Product
Use a dry and soft cloth to wipe it.
∗
Use slightly wet cloth to wipe when contamination is high
(Do not use abrasive).
Air outlet
Air inlet
▶
Dust outlet
Dust inlet
To Next Page
Loading...
Need help?
General
