Coway AP-1019C Manual

18
17
■ How to Replace Deodorization/HEPA lter
(Replace every 12 months)
When the HEPA/CARBON lter alarm indicator is on, replace it.
4. After assembling to the product, close the front cover.
5. Reset the alarm by pressing the lter reset button for
3 seconds.
1. Open the front cover and remove the lter set entirely.
∗
It prevents dust generation inside the space.
2. Move to the place where the lter replacement is possible
and separate the HEPA lter and deodorization lter
respectively.
3. Clean/Wash the area except the lter and dry it before
assembling the new lter.
∗
Check the front display of the lter.
∗
Assemble the deodorization lter and the HEPA lter respectively.
Tips
- The cover with the lter attached may damage if it is dropped while moving,
so do not move it upside down.
- Pre-lter, Deodorization lter, and Dust collection lter are consumables.
3 sec.
HOW TO REPLACE FILTER
Maintenance

Coway AP-1019C Specifications

General

Brand	Coway
Model	AP-1019C
Category	Air Cleaner
Language	English