Coway AP-1019C Manual

TROUBLESHOOTING
The air purier may malfunction due to lack of familiarity and minor causes even though the
product is not broken. Check the following in such a circumstance to resolve the issue easily without
assistance from the service center. If the problem persists after checking the items below, please
contact the service center.
Symptom Checkpoint Measures to take
No air is coming
out.
• Is the power cord plugged in?
Plug the power cord into a
220 V- 240 V~ 50 Hz, 60 Hz outlet.
• Are all the indicators o?
Press the Power button and select the
desired function.
• Is there a power outage?
Use the product after the electricity is
restored.
The air volume
does not change.
• Is the Auto Mode indicator on?
Air volume selection is available only
in Manual Mode (normal).
• Is the Silent Mode indicator on?
Air volume selection is available only
in Manual Mode (normal).
The air volume
has weakened
considerably.
• Has the lter cleaning or
replacement time passed?
Check the lter cleaning and
replacement cycle and clean or replace
the lter.
The pollution level
does not change.
• Is there dirt on the pollution sensor
lens?
Clean the pollution sensor lens.
(Refer to P. 15.)
• Does the pollution level remain at
High?
Adjust the pollution sensor's sensitivity
to Low or Standard. (Refer to P. 14.)
• Does the pollution level remain at
Low?
Adjust the pollution sensor's sensitivity
to High or Standard. (Refer to P. 14.)
There is a bad
smell coming our
of the air outlet.
• Has the lter cleaning or
replacement time passed?
Check the lter cleaning and
replacement cycle and clean or replace
the lter.
The pollution
level indicator is
ashing.
• Contact the service center.
Other functional
defects
• Check the problem, unplug the power cord, and contact the service center.
▶ Filter replacement, service inquiry: 1588-5200

Coway AP-1019C Specifications

General

Brand	Coway
Model	AP-1019C
Category	Air Cleaner
Language	English