Do not use damaged power plugs or loose sockets.
The power plug must be plugged into 220 v – 240 v~ 50 hz, 60 hz.
Do not pull on the power cord to move the device.
Do not touch the power plug with wet hands.
To avoid damaging or warping the power cord, do not use excessive force
to bend the power cord or put heavy objects on top of it.
Do not repeatedly connect and disconnect the power plug.
If water enters the power supply, unplug the power and completely dry
before using again.
Be sure to unplug the power during product repair, maintenance or part
replacement.
If the power plug's pins or contact area become covered in dust or water,
wipe them thoroughly.
Do not plug several electric appliances into one socket, and use only a
dedicated socket.
Unplug the power when not used for a long time.
Do not carelessly connect or tamper with the power cord.
If the power cord is damaged, do not replace it yourself. Contact a service
center to have it replaced.
Do not put on top of electric products like heaters or televisions.
To Next Page
Loading...
Need help?
General
