Coway AQUAMEGA 100 - Diverter Part Names and Uses; Diverter Connector Sets

INSTALLATION
Part Names and Uses
1.DIVERTER TYPE
Connector Set
1 Ring Nut : The nut connected to the water
faucet (M22XP1.0)
2 Handle (Switch) : The handle that determines the
direction of the water output.
3 Fitting : This is the tting that connects the tubing
for water supply from faucet to the device.
4 Water Outlet : The water outlet where the
tap water comes out.
Diverter
1
3
2
4
*
The arrow lines in the gure : Represents the specications (diameter) of the water faucet.
*
The direction of the
handle is the same as
that of the water ow.
To the water purier To the water outlet
①
0.8071-28 UNF
② 0.9213-28 UNF ③ 0.7205-28 UNF
< Water Flow >
1
Feed water connection
(Remove sticker before using this product.)
Second, select installation method according to your
kitchen condition between 1. Diverter and 2. Adapter type
First, connect the white tubing to the feed water
connection
1
, then connect to the diverter or T-valve.