Coway AQUAMEGA 100 - Page 13

12
11
INSTALLATION
Maintenance
INSTALLATION
TYPE
TYPE 1 TYPE 2 TYPE 3
Installation
parts
Installing
your
product
M22XP1.0
M22XP1.0
0.7205-28 UNF
③0.7205-28UNF
①0.8071-28UNF
②0.9213-28UNF
① 0.8071-28UNF ② 0.9213-28UNF
Open the water
outlet cap of the
water faucet by
turning it.
Connect
diverter to water
faucet by hand
tightening
If the provided
diverter does not
t, use diverter
adapter ③ and try
to connect again.
Fasten the ring nut
of the diverter to the
installed connector.
At this time, confirm
that the seal is properly
installed in the ring nut.
Connect the tubing
for the feed water for
the water purifier to
the fitting by inserting
it into the fitting fully.
After the installation,
operate the valve to
Connect the tubing
for the feed water for
the water purifier to
the fitting by inserting
it into the fitting fully.
After the installation,
operate the valve to
Fasten the ring nut
of the diverter to the
installed connector.
At this time, confirm
that the seal is properly
installed in the ring nut.
If the diverter
adapter ③ does
not t, use diverter
adapter ① or ②
and connect again.
Connect the tubing
for the feed water
for the water
purifier to the
fitting by inserting
it into the fitting
fully. After the
installation, operate
the valve to check
if the valve works
properly and no
water leaks.
Open the water
outlet cap of the
water faucet by
turning it.
Open the water
outlet cap of the
water faucet by
turning it.
(1)
(2)
(3)
(1)
(2)
(3)
(4)
(1)
(2)
(3)
(4)
∗
Caution : Be sure to seal the
diverter tightly. Otherwise,
water may leak.
∗
Caution : If the seal or o-ring is
missing or the connector is not
properly installed, water may leak
∗
Caution : If the seal is missing
or the ring nut is not properly
installed, water may leak.
∗
Caution : If the seal is missing
or the ring nut is not properly
installed, water may leak.
∗
Caution : If the seal or o-ring is
missing or the connector is not
properly installed, water may leak
PUSH
TUBING
FITTING
PUSH
PUSH
TUBING
TUBING
FITTING
FITTING
check if the valve works properly and
no water leaks.
check if the valve works properly and
no water leaks.