Safety Information
Operating Instructions Troubleshooting Tips Customer Service
It indicates the water level of storage tank by stages.
3. Indication Lamp of Water Level
It indicates the state of hot water by turning on or off
the “Hot Water Selection Switch”.
4. Indication Lamp of Hot Water
It indicates the statement of cold water by turning on
or off the “Cold Water Selection Switch”.
5. Indication Lamp of Cold Water
It indicates the temperature of hot water according to
the hot water selection or the degree.
6. Indication Lamp of Hot Water Temperature
It indicates on/off state of power.
1. Indication Lamp of On/Off
In case that storage tank is full for a hour, “UV” lamp
lights on and lamp lights off in serial. In case that
“UV” lamp blinks, change the UV Lamp.
2. Indication Lamp of UV Cycle
Indication Parts
It indicates the temperature of cold water according to
the cold of water selection or the degree.
It is controlled by Hot Water Selection switch
It is controlled by Water Selection switch
7. Indication Lamp of Cold Water Temperature
H : High
M : Middle
L : Low
8. Indication Lamp of Hot Water Temperature Level
H : High
M : Middle
L : Low
9. Indication Lamp of Cold Water Temperature Level
To Next Page
Loading...
