5. Remove the antibacterial lter* from the back of the lid.
Clean the antibacterial lter* with ltered water. Then reinstall the
antibacterial lter in place.
6. Wipe the inside of water tank with a clean soft cloth.
7. Pour stored water into the water tank. Plug in the power cord. Then drain
all the water by continuous dispensing.
8. Close the lid of inner water tank. Hook the 6 clamps of the lid and place the
overheating hose in place.
9. Close the top cover. Open the
feed water supply valve.
1
12
2
1
2
* The Antibacterial lter contains silver, which is known to inhibit the propagation of microorganisms and to
maintain the integrity of the lter.
Maintenance
16
15
CLEANING METHOD
To Next Page
Loading...
