Coway CHP-250L User Manual

INSTALLATION TIPS
• Openthefeedwatersupplyvalve.
The feed water must be supplied to operate the water ltration device normally.
• Afterinstallingtheproduct
Get rid of the saved water above the full water in the inner water tank 2 times or more to use.
• Whentheindicatorintheindicationpartisturnedo
When the indicator in the indication part is turned o, check if the power supply was stopped
due to the power failure or other cause.
• Regularlterreplacement
If the lter is not regularly replaced, it may degrade the water quality from the product. The lter
replacement cycle depending on the feed water quality can be shortened rather than expected
replacement cycle.
• Whenyoudidnotusetheproductforalongtime
If the water has been stored inside water tank for a long time, drain the water inside. Flush newly
puried water before use.
• Checkupbeforeproductstorageforalongtime
Close the feed water valve and unplug the power cord.
Connect the power plug to the electrical outlet before operating the
product.
220 - 240 V~ 50 Hz

Coway CHP-250L Specifications

General

Brand	Coway
Model	CHP-250L
Category	Water Filtration Systems
Language	English