BUTTONS AND INDICATORS
■ To use the Cold Water function
Press the Cold Water button for 2 or more seconds and check
that the Cold Water function is illuminated on the display and
the Cold Water Temperature Indicator is illuminated.
To turn o the Cold Water function, press the Cold Water
button for 2 or more seconds again.
You can get cold water about 30 minutes after you turn on
the cold water function.
■ To use the Hot Water function
Press the Hot Water button for 2 or more seconds and check
that the Hot Water function is illuminated on the display and
the Hot Water Temperature Indicator is illuminated.
To turn o the Hot Water function, press the Hot Water button
for 2 or more seconds again.
You can get hot water starting about 30 minutes after you
turn on the hot water function.
■ To use the Eco function
Hold the Eco button for 2 seconds or more to turn on the Eco
function.
The Eco indicator blinks when it detects that it is night.
If the Eco indicator is lit, the cold water temperature will be kept
warmer when the area around the purier is dark.
- If cold water is not released from the water purier, check that the Cold Water
Mode indicator is lit up on the display (see p. 11).
- When the level of ambient water inside the water tank is low, you may not be
able to get as much water as usual.
- When there is a power failure or the power cord is reconnected, the machine
is reset to its most recent settings.
Tips
2 seconds2 seconds2 seconds
2 seconds2 seconds2 seconds
2 seconds2 seconds2 seconds
To Next Page
Loading...
Need help?
General
