24
23
FILTER REPLACEMENT METHOD
Maintenance
3. After separating the tting connected to the lter to replace, please
replace the lter. (Separate the tting using the proper tool.)
4. Please t the groove of the front cover.
After tightening 1 xed screw in the front draining part using the Phillips
driver, let down and close the front draining door.
When you are replacing lters, please make sure that a corresponding lter
and a hose are rmly connected and that there is no leakage.
It is recommended to empty the water tank lled with the ltered water at
least one time right after the lter replacement.
Tips
▶
▶
Use new lters only after washing.
- Neo-Sense lter: Install after washing with source water for about 1 minute.
- Membrane lter (RO): Install the main water supply valve and install after
washing with source water for about 5 minutes.
- Nanotrap lter: Install after washing with source water for about 3 minutes.
- Plus Inno-Sense Filter: Install with no separate ushing.
- Plus Inno-Sense Filter (D): Install with no separate ushing.
Tips
To Next Page
Loading...
