To Next PageTo Next Page
Need help?Do you have a question about the Coway BB09-A and is the answer not in the manual?
General| Water Temperature Options | Hot, Cold, Room Temperature |
|---|---|
| Hot Water Temperature | 85-90°C |
| Cold Water Temperature | 5-10°C |
| Voltage | 220V |
| Material | Plastic, Stainless Steel |
| Child Safety Lock | Yes |
| Energy Saving Mode | Yes |
| Cooling Capacity | 5L/hr |
| Heating Capacity | 5L/hour |
| Filtration Stages | 4 |
| Filter Type | Post-Carbon |
User-friendly installation connecting existing shower hose without extra parts.
Sleek and luxurious design that enhances bathroom aesthetics.
Easy switching between soft and tap water via front screen valve.
Simple regeneration process by turning the switching valve to the regeneration position.
Critical warnings for potential serious injury or death if safety instructions are not followed.
Important warnings for potential considerable physical injury or property damage.
Precautions to prevent accidents and ensure safe operation during use.
Notices for potential slight physical injury or property damage if guidelines are not met.
Illustrates the front and rear views of the water softener, labeling key components.
Shows the product setup and key components for wall-mounting installation.
Lists common accessories included with the water softener, such as filters and hoses.
Details the specific components required for mounting the unit on a wall.
Details the specific components required for setting up the unit on a stand.
Step-by-step guide for installing the water softener in a stand-type configuration.
Step-by-step guide for installing the water softener in a wall-mount configuration.
Instructions for operating the product to dispense softened water.
Instructions for operating the product to dispense tap water.
Guidance on actions to take after finishing shower or use, including potential water flow and temperature notes.
Troubleshooting when softened water lacks desired softness or slipperiness.
Troubleshooting low water pressure or flow after installation.
Addressing white powder residue around the product post-regeneration.
Explanation for soap/shampoo residue feeling on skin with softened water.
Troubleshooting discolored water, potentially due to ion exchange resin.
Explanation for operational noises, often related to regeneration cycles.
Troubleshooting no water output from the softener.
Checking for leaks or water discharge from the drain hose.
Addressing the time taken for water to reach desired temperature.
