Coway BB09-A - REGENERATION

1. Check the ux gauge at the front of the product to identify whether the time to regenerate has
been reached. (This is determined by the hardness of the feed water).
2. Separate the top cover of the product.
3. Use the cap opener to open the regeneration tank cap as shown
on the picture.
4. Open the regeneration material pack and pour all the contents
into the regeneration tank.
*
Net Weight : 350g
5. Use the cap opener to close the regeneration
tank cap as shown in the picture and then
turn the switching valveto the ‘Regenerate’
position.
REGENERATION
F
I
L
T
E
R
S
A
L
T
F
I
L
T
ER
C
L
O
S
E
F
I
L
T
E
R
C
L
O
S
E
O
P
E
N
S
A
L
T
C
L
O
S
E
S
A
L
T
F
I
L
T
E
R
SALT
SALT
F
I
L
T
E
R
S
A
L
T
F
I
L
T
ER
C
L
O
S
E
F
I
L
T
E
R
C
L
O
S
E
SALT
SALT
- The average water hardness in US is 400 ppm
and regeneration is recommended when the
ux gauge points one dot. The regenerating
period may dier from the water hardness.
- The average water hardness in Malaysia is
100 ppm and regeneration is recommended
when the ux gauge points to three dots. The
regenerating period may dier from the water
hardness.
- The ux gauge needle indicates the amount of
softened water used.
Tips
Move the product near to a drain before opening the
regeneration tank cap.
Because the regeneration tank cap is opened, water will be
drained away from the drain hose in the back of the product.