1. Close the shower head faucet.
If your hose is not long enough to connect product from the faucet,
exchange the your hose for new shower hose A (2 m) included in
the product package.
2. Make sure to insert the rubber washer when you connect shower
hose A to the faucet.
3. Fix the bracket onto the wall by using the anchors and screws, hang the product onto on the
bracket and check if the main body is rmly xed.
4. Connect the shower hose A to the water supply port (IN) of the
product.
(Make sure to insert the rubber washer.)
To Next Page
Loading...
