Where to install the water
ltration unit I
Install the product in a cool part of the
room, on an even surface, out of direct
sunlight and away from humidity, dust, and
dripping water.
After installing the water
ltration unit
Filter the water for more than 50 minutes
or ll and drain once before using the unit.
(Drain the ltered water more than twice.)
Cold water tubing
Make sure the unit is connected to the cold
water supply line.
(If connected to the hot water supply line,
the ltration unit may be damaged.)
Water ltration installation
location II
Allow a clearance of 10 cm or more behind
the product, and level the water ltration
unit.
Relocation and installation
Following relocation of the unit, plug in
the electric power cord 30 minutes after
installation is complete.
There may be some water remaining inside the filter, which was used to
test the product during inspection process.
Please rest assured that it is a brand new product.
When installing this new ltration unit, do not reuse the main water
supply valve and hose.
Tips
Be Careful!
HOW TO INSTALL
To Next Page
Loading...
Need help?
General
