Coway P-300L - Page 15

3. Remove the fitting on the new filter. Then take out the old filter and replace with new one.
4. Close the front cover tightly.
Screw the 2 fixing screws at the top of the product using a screw driver. Close the top cover.
Before installing a new filter, please do the filter flushing first as directed below :
13
14
H
o
w
t
o
U
se
FIL
TER
REPL
ACEMENT
Filter name
Flushing time
Comment
PLUS SEDIMENT FILTER
10 seconds
-
PRE-CARBON FILTER
POST-CARBON FILTER
3 minutes
Connect feed water to outlet nipple
RO MEMBRANE FILTER
5 minutes
With drain valve